Select Page

scope of utilisation of e waste in concrete

Concrete Batching Plants

FULLY RELIABLE SOLUTIONS TO MEET YOUR NEEDS

Frumecar focuses on offering the most effective and efficient solutions, seeking for the optimum productivity and operating rates. It is for this reason that we design our plants to be more powerful and robust, but also to be easy to transport and install.

We define each and every part to make them more reliable and resistant and always use top-quality components from leading international brands.

Any of the concrete batching plants of our wide range of products will improve the performance and guarantee the quality and results of each project, regardless of its requirements, thanks to the different production capacities, logistics operations and modularity of our plants, which can be adapted to different space configurations and needs.

We offer a wide range of concrete manufacturing options that cater to any need.

 

  • Fixed or mobile
  • Wet mix or Dry mix

Utilisation of E – Plastic Waste in Concrete – IJERT

Electronic waste plastic abbreviated as e-plastic consists of discarded old keyboards, cabinets, smart phones, LCDs etc., basically any electrical or electronic appliance that has reached its end of life .In present study utilization of e-plastic as fine aggregate in concrete with 10% replacement on strength criteria of M20 grade.

USE OF WASTE POLYTHENE IN MODIFICATION OF BITUMINOUS MIX FOR

[2] 2. Aslam Shahan-ur-Rahman “Use of Waste Plastic in Construction of Flexible Pavement”, New Building Materials & Construction World, 2009. [3] Justo C.E.G. and Veeraragavan A “Utilization of Waste Plastic Bags in Bituminous Mix for Improved

STRENGTH ANALYSIS FOR UTILIZATION OF SHAHABAD STONE WASTE

using concrete. Key words: Concrete, Stone Waste, Shahabad Stones, Course Aggregates, Compressive Strength, Tensile Strength, Flexural Strength, Coarse Aggregate. Cite this Article: N. Soundarya and Dr. T. Felix Kala, Strength Analysis for Utilization of Shahabad Stone Waste in Concrete, International Journal of Civil Engineering and

EXPERIMENTAL STUDY ON E–WASTE CONCRETE AND COMPARING WITH CONVENTIONAL CONCRETE

EXPERIMENTAL STUDY ON E–WASTE CONCRETE AND COMPARING WITH CONVENTIONAL CONCRETE MANIKANDAN M 1, ARUL PRAKASH D * AND MANIKANDAN P2 1SRM University, Kattankulathur, Chennai, Tamilnadu, India 2Periyar Maniammai University, Thanjavur, Tamilnadu, India

Partial Replacement of E-plastic Waste as Coarse-Aggregate in Concrete

Objectives x To identify that e-waste can be disposed by using them as construction material. x Replacement of e-waste as coarse aggregate. x To limit the amount of toxic substances in certain electronic product. x To develop and improve the technology for e

An Experimental Study on Concrete by using E

concrete with the addition of Electronic waste in concrete. It is found that the use of Electronic waste aggregates results in the formation of light weight concrete. In this research article Coarse aggregate is partially replaced by E- waste from 0% to 30% Then in these mix 10%, 20% and 30% of fly ash is also added by partial replacement of ...

small concrete mixer truck 4m3 and 6m3 concrete mixing station stationary or mobile type hzs25 mobile concrete batching capacity of hot mix plant pump

small concrete mixer truck 4m3 and 6m3 cement self propelled wheel 4x4 concrete pump with mixer 11t/h ce automatic concrete batching plant philippinest price in laval

(PDF) USE OF ELECTRONIC WASTE AS A PARTIAL REPLACEMENT OF

Electronic waste or e-waste describes discarded electrical or electronic devices. Used electronics which are destined for reuse, resale, salvage, recycling or disposal are also considered as e-waste. Informal processing of electronic waste in

hzs120 concrete mixing plant automatic terrazzo pressing machine a dasion deepa m sand machine price hzs90 90m3 h for

How Does E-Waste Affect the Environment?

Jun 02, 2015 · Here at home, many legislators are pushing for stricter e-waste policies. How do I dispose of e-waste safely and ethically? There are many ways to properly reuse or recycle electronic devices – and it is not by leaving your junk printer on the curb. The Environmental Protection Agency (EPA) has started a commission to ensure that e-waste is ...

Category 5: Waste Generated in Operations

Only waste treatment in facilities owned or operated by third parties is included in scope 3. Waste treatment at facilities owned or controlled by the reporting company is accounted for in scope 1 and scope 2. Treatment of waste generated in operations is categorized as an upstream scope 3 category because waste management services are purchased by

Indian Institute of Chemical Engineers Calcutta Regional Centre

- There are 10 states that contribute to 70% of the total E-Waste generated in the . country. - 65 cities generate more than 60% of the total E-Waste in India. -Among the top ten cities generating E-Waste, Mumbai ranks first followed by . Delhi, Bengaluru, Chennai, Kolkata, Ahmedabad, Hyderabad, Pune, Surat & Nagpur.

utilisation of steel ore waste in concrete

Utilization of Waste Steel Scrap for Increase in Strength ... composite materials and these composite shows more Key words: Steel scrap, CNC steel scrap, Concrete, Coarse strength with wire mesh. aggregate So idea behind the study is the utilization of steel scrap in improvement in the strength of concrete and use of I. INTRODUCTION waste …

UTILIZATION OF E- WASTE AND PLASTIC BOTTLE WASTE IN CONCRETE

UTILIZATION OF E- WASTE AND PLASTIC BOTTLE WASTE IN CONCRETE

Technical Advisory T 5040.37 Use of Recycled Concrete

Jul 03, 2007 · Technical Advisory T 5040.37 Use of Recycled Concrete Pavement as Aggregate in Hydraulic-Cement Concrete Pavement. July 3, 2007. What is the purpose and scope of this Technical Advisory? This Technical Advisory issues information on state-of-the-practice and guidance for the use of recycled concrete pavement as aggregate in concrete used for ...

Efficient Utilization of Construction and Demolition Waste in Concrete

In India, appliance of construction and demolition (C&D) waste is bound to non-structural concrete, pavements, and backfilling. Research paper highlights the backdrop of construction and demolition waste concrete wherein coarse recycled aggregates (CRA) accept ...

twin shaft portable сколько стоит мини бетонный завод cbc equipment

GUIDELINES ON ENVIRONMENTAL MANAGEMENT OF CONSTRUCTION

Guidelines on Environmental Management of C & D Wastes (CPCB, 2017) 1 SECTION I Objective and Scope 1. Urban waste management Safe and cost-effective management of solid wastes (SW) is a significant

Use of Waste Materials As a replacement of Coarse

2013-05-15 · Use of Waste Materials As a replacement of Coarse Aggregate in Concrete Mix ... EXPERIMENTATION CONCRETE MIX DESIGN TESTING & OBERVATIONS MOMENT RESISTING CAPACITY OF BEAM CONCLUSION SCOPE OF FUTURE WORK REFERENCES 5. OBJECTIVES For sustainable development of structural engineering. To reduce or utilize the waste generated from structures. To use various waste …

Utilization of E-Waste in High Strength Cement Concrete

Utilization of E-Waste in High Strength Cement Concrete ... Graph 2: Workability Test Result of E-waste concrete (Bar Chart) C. E-Waste with Fly Ash Concrete

Concrete Mix Design - The Right Concrete Mix

Find out here how to get the best concrete mix for your project. Learn about why concrete mix design is important, what goes into concrete mixes, and how to design a mix for concrete that suits your needs.

operation manuals cement self propelled wheel 4x4 concrete pump with mixer used construction machinerychina used in ethiopia

Utilization of Electrolytic Manganese Dioxide (E.M.D.) waste

Utilization of Electrolytic Manganese Dioxide (E.M.D.) waste in concrete exposed to salt crystallization N. Chousidisa,b,⇑, I. Ioannoub, G. Batisa a School of Chemical Engineering, National Technical University of Athens, Athens, Greece

Case Studies in Construction Materials

The scope of Case Studies in Construction Materials includes, but is not restricted to, new works and repair and maintenance of the following: bridges, high-rise buildings, dams, civil engineering structures, silos, highway pavements, tunnels, water containment structures, sewers, roofing, housing, coastal defences.

portable mortar mixer plant equipment at kolkata another frac sand mine announced 75 m3/h china good angono batching plant on sale in 2016

STUDY ON REPLACEMENT OF COARSE AGGREGATE BY E

E-waste is used as one such alternative for coarse aggregate. Owing to scarcity of coarse aggregate for the preparation of concrete, partial replacement of E-waste with coarse aggregate was attempted. The work was conducted on M20 grade mix. The

scope of utilisation of e waste in concrete

Electronic waste or E-waste is the discarded electrical or electronic devices. Used electronic devices which cannot be reused, recycled, resale and disposal. Increased use of electronic waste in developing countries including our country may cause serious. Learn More

(PDF) Utilization of E-waste in Concrete and its

An experimental approach is made on the utilization of E-waste particles as fine aggregates in concrete with a percentage replacement ranging from 0 % to 20% on the strength criteria of M30 Concrete.

Dry mix

HIGH-PERFORMANCE CONCRETE DOSING PLANTS.

Robust and compact units, designed with the components of leading brands and capable of working non-stop over long periods of time.

With a capacity ranging from 60 to 120 m³/h.

CONCRETE BATCHING PLANTS

WET WAY

Compact, reliable and offering full performance.

Plants with small-scale concrete mixer and a high production capacity. Designed to operate at full performance under any circumstances.

With a capacity ranging from 30 to 150 m³/h.

CONCEPT AND DESIGN

A unique approach: to optimise your profits.

Frumecar’s concrete batching plants have been designed with a clear goal: making a profitable investment for your business, in terms of performance and reliability.

Designed for a non-stop, hassle-free operation, with minimal maintenance requirements. Materials, manufacturing and components designed to achieve this goal.

PERFORMANCE, RELIABILITY AND HASSLE-FREE. A WIDE RANGE OF MODELS AND OPTIONS, DESIGNED TO CATER TO YOUR NEEDS.

 

 

Built to perform and last

What makes us different is that we focus on all of the above to achieve our goal.

Easy maintenance

Our plants have been designed for easy maintenance, thanks to their accessible components.

Advanced automation systems

By implementing the advances of the Industry 4.0, our R&D department sets the guidelines for the sector.

COMPONENTS

The best of the best; we couldn't offer you anything less.

Frumecar’s plants are equipped with the best components and materials in the market. We would not be capable of offering such a high-quality product without these components and materials:

  • PLCs, motors, geared motors and Siemens electrical switchgear
  • Sicoma mixers, powered with Siemens motors and an alarm system integrated in our software, supplied exclusively to Frumecar
  • WAM Screw conveyors and components for silos. Likewise, WAM screw conveyors use Siemens motors, which have been exclusively supplied to Frumecar

Many things make Frumecar's concrete batching plants unique. Here are some of them.

The lowest assembly and installation costs in the market.

Frumecar’s concrete batching plants have been designed to optimise your installation costs.

  • Factory pre-installation and design of folding components that greatly facilitate the process.
  • Modular design, achieving an extremely simple assembly, with no need for cranes or requiring minimal use of cranes.
  • They can be installed with no civil works required or with minimal intervention in the case of the largest plants.
Top-quality finishing materials and treatments for a long-lasting finish

We don’t cut costs in the finish quality; it is the differentiating factor that will make your unit last beyond your expectations.

  • Shot-blasted steel surface treatment to remove foreign bodies from metal surfaces, ensuring the perfect adherence of the subsequent coats of finish.
  • Joints sealed with polyurethane prior to applying the surface finish coats.
  • Double polyamide epoxy primer with Zinc Phosphate on each part and component of the machine (eliminating the possibility of suffering from surface corrosion).
  • Hot galvanised finish in areas on which operators walk or handle, such as ladders or guardrails, or zinc-plating on elements subject to friction and wear and tear.
  • Unit processing of parts prior to assembly.
  • Use of DACROMET fastening elements with non-electrolytic coating to protect them against corrosion.
Speedy supply and service.

We offer the fastest delivery times in the market.

We have a stock of prefabricated modules at our manufacturing plant that simplify the production process and reduce the delivery times.

Minimum logistics costs associated with shipment and delivery

Our mobile plants travel directly coupled to the tractor unit and all other parts are transported on standard HC containers, which are cheaper and easier to handle. Huge savings for your company.

In addition, the compact dimensions of our plants means only one or two of these containers are needed for most of our models.

Tested at the factory. Hassle-free, with no unexpected problems.

Frumecar’s plants are tested at the factory before they are shipped to the customer, preventing any form of unexpected problems and minimising the time required to commission them.

Equipped with 100% proprietary and built-in software; forget about compatibility problems and duplicate suppliers.

Frumecar’s concrete batching plants feature our “K2” software, the most advanced, stable and reliable software in the market. In addition, these plants are compatible with “Frumecar Cloud”, our Business Intelligence platform, a system that can take your business to another dimension.

Therefore, our plants eliminate the need to depend on third-party applications for their operation; less complications, less problems.

Guaranteed operation.

Frumecar’s plants have a redundant automation system that allows them to continue operating in the event of computer malfunction.

Frumecar will supply a «Digital Twin» of each plant to its customers, on which they can conduct research, tests and train their teams without the need to interrupt the operation of the real plant.

In the event of an incident, our technicians can connect to the plant and work directly on it using remote assistance systems. In any case, our technical service can travel to your facilities and resolve any incident.

A flexibility and service only Frumecar can offer.

When you acquire one of Frumecar’s concrete batching plants you also acquire the know-how, experience and reliability of a company that focuses on R&D for the sector and with a true service vocation, with 49 years of experience in the market and more than 4,500 satisfied customers.

REQUEST YOUR CATALOGUE

Request our catalogue for more information about our full range of concrete batching plants.

PLANTS WET WAY

Reliability and ease of assembly.

The most comprehensive range of top-performance concrete mixer plants; discover our models and the customisation options.

PLANTS Dry mix

Versatile and high capacity.

For small or large production volumes, with everything you need to make your business profitable.

Accessories, configure your plant tailored your needs.

We offer a huge range of accessories for our plants, so they can be adapted to any specific circumstance or need. Contact us for more information about your specific needs or request a catalogue.

  • SILOS AND SCREW CONVEYORS
  • ACCESSORIES FOR HOPPERS
  • ACCESSORIES FOR CONCRETE MIXERS
  • DOSING SYSTEMS
  • COMPUTER SYSTEMS

 

Contact us

If you need a quote or personalized information, do not hesitate to send us a message

Privacy Policy

2 + 2 =